Disc Brakes Or Rim Brakes
byon 06-25-2012 at 01:29 AM (201 Views)
"This can be a quite important selection when you
are purchasing a mountain bike. There are truly
two answers to the question of disc brakes or
If you want greater, much more consistent brake performance
in all circumstances, disc brakes are what you should
be choosing. On the other hand, if you want the
lightest set up you can have and you are willing to
accept small variances in brake performance, or you
want the lowest price possible, rim brakes are
what you need to be deciding on.
More than the years, mountain bikes have gone by way of
many design adjustments. They started out with the
original cantilever brakes, then went via the U
Brake years, and are now with V Brakes. In most
circumstances, the V Brakes seem to function nicely.
In wet or muddy conditions, rim brakes will perform
poorly. Over time, they can wear right by means of the
side of your rim, causing the side of the rim to
blow proper off.
Disc brakes on the other hand have been around for
a long time in cars but werent used on bikes considerably
until the late 1990s. There had been some issues in
the earlier models, although the cable actuated or
hydraulic brakes of these days seem to function rather nicely.
In terms of performance, disc brakes appear to work
much better than rim brakes, particularly in wet or muddy
areas. Disc brakes normally demand less force
to apply and are not effected by the rim or wheel
Cost is an problem, as disk brake systems tend to be
a lot more expensive than rim brakes. Mechanical or cable
actuated brakes are a closer match, though they
will nonetheless cost a lot more. Hydraulic brakes on the other
hand cost a lot a lot more.
When you make that final option, weight out the above
options then make your decision. Some riders favor
disc brakes, while others favor rim brakes - making it
a matter of opinion.
(word count 317)
PPPPP electric impact wrench investigation"